anufix Abstandshalter Online Shop
Keine Mindestbestellmengen!
No Allen screw - no Allen key
Allen screws are tiny and get lost easily. The fine threads do not give a firm hold and are quickly turned off. The mounting with hex wrenches is cumbersome and annoying due to the narrow distance to the wall.
anufix standoffs don't have Allen screws and can be easily installed with your bare hands.
3 parts provide more than 2
Conventional standoffs have only 2 parts. A head part and a spacer part. anufix standoffs consist of 3 parts: Head part, middle part and spacer.
The middle part and spacer are screwed to the sign before wall mounting. The pre-assembled sign is then simply attached to the wall. Finally, the head sections are screwed in - finished.
Always even – never askew again
Signs often have to be mounted on uneven ground. With 2-part systems, the distances are always mounted on the wall first and then "sit" on the wall at different angles. This makes it more difficult to mount the sign and disturbs the appearance of the sign.
anufix standoffs are screwed to the sign before wall mounting and are therefore always at right angles to the sign and wall.
Correcting boreholes
Drill holes do not always succeed exactly where they are planned. With 2-part systems, the spacers must first be screwed to the wall and thus naturally sit exactly at the drill hole. If the drill hole is too far from the planned point, the sign will no longer fit on the spacers.
The 3-part anufix standoffs also offer a solution for this because they are pre-assembled. Watch how this works in our video.
Easy mounting even on uneven walls
